top of page
M ONE

M ONE

SKU: M One
Small, efficient and uncompromisingly stable - the M ONE is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel.
In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.

  • Features

    • Output power RMS / max.  
      - @ 4 Ohms 1 x 240 / 480 Watts
      - @ 2 Ohms 1 x 410 / 820 Watts
      - @ 1 Ohm 1 x 600 / 1,200 Watts
      - bridged @ 4 Ohms -
      - bridged @ 2 Ohms -
      Max. output power per channel* Up to 720 Watts RMS @ 1 Ohm
      Amplifier technology Class D
      Inputs 2 x RCA / Cinch
      2 x Highlevel speaker input
      1 x Remote In
      1 x Remote control input
      Input sensitivity RCA / Cinch 0.5 - 6 Volts
      Highlevel 1.1 - 13 Volts
      Input impedance RCA / Cinch 20 kOhms
      Input impedance highlevel 13 Ohms
      Outputs 1 x Speaker output
      Output voltage RCA / Cinch - 
      Signal converter for digital input - 
      Frequency response 10 Hz - 250 Hz
      Bass boost 0 - 12 dB / 25 - 75 Hz
      Highpass - 
      Lowpass 50 Hz - 250 Hz adjustable
      Bandpass 10 Hz - 250 Hz adjustable
      Subsonic 10 Hz - 50 Hz adjustable
      Phase 0 - 180° adjustable
      Slope high- / lowpass - 
      Slope subsonic / lowpass 12 / 24 dB/Oct.
      Signal-to-noise ratio digital input - 
      Signal-to-noise ratio analog input 95 dB (A-weighted)
      Distortion (THD) 0.20 %
      Damping factor 100
      Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
      Idle current 650 mA
      Fuse 2 x 35 A Maxi-fuse (APX)
      Additional features Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control 
      Dimensions (H x W x D) 50 x 230 x 154 mm /
      2.00 x 9.06 x 6.06”

  • Specification

    Output power RMS / max.  
    - @ 4 Ohms 4 x 100 / 200 Watts
    - @ 2 Ohms 4 x 100 / 200 Watts
    - @ 1 Ohm -
    - bridged @ 4 Ohms 2 x 200 / 400 Watts
    - bridged @ 2 Ohms - 
    Max. output power per channel* Up to 135 Watts RMS @ 2 Ohms
    Amplifier technology Class D
    Inputs 4 x RCA / Cinch
    4 x Highlevel speaker input
    1 x Remote In
    Input sensitivity RCA / Cinch 0.5 - 6 Volts
    Highlevel 1.3 - 13 Volts
    Input impedance RCA / Cinch 20 kOhms
    Input impedance highlevel 13 Ohms
    Outputs 4 x Speaker output
    Output voltage RCA / Cinch - 
    Signal converter for digital input - 
    Frequency response 10 Hz - 30,000 Hz
    Bass boost - 
    Highpass 15 Hz - 4,000 Hz adjustable
    Lowpass 40 Hz - 4,000 Hz adjustable
    Bandpass 15 Hz - 4,000 Hz adjustable
    Subsonic - 
    Phase - 
    Slope high- / lowpass 12 dB/Oct.
    Slope subsonic / lowpass - 
    Signal-to-noise ratio digital input - 
    Signal-to-noise ratio analog input 98 dB (A-weighted)
    Distortion (THD) 0.05 %
    Damping factor 100
    Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
    Idle current 1,100 mA
    Fuse 2 x 30 A Maxi-fuse (APX)
    Additional features Active, adjustable crossover, input mode switch, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP)
    Dimensions (H x W x D) 50 x 230 x 154 mm /
    2.00 x 9.06 x 6.06”

  • Delivery Contents

    1 x Amplifier HELIX M ONE
    1 x Cable remote control
    1 x Mounting material
    1 x Instruction manual

$550.00Price
bottom of page